Introduction
This manual provides comprehensive instructions for the installation and use of wall-mounted solar water heaters suitable for balconies. It is designed to ensure safe and efficient operation, as well as to extend the lifespan of your device. Please read this document thoroughly before installation.
Safety Precautions
- Ensure that the installation area is stable and can support the weight of the solar water heater.
- Avoid installing under direct sunlight during high-temperature hours to prevent overheating.
- Keep children away from the equipment during installation and operation.
- Disconnect power supply before performing any maintenance or repairs.
Installation Steps
Step 1: Preparation
1. Confirm all components included in the package match the list provided.
2. Choose an appropriate location on the balcony with sufficient sunlight exposure.
Step 2: Mounting the Collector
1. Attach the bracket securely to the wall using the provided screws.
2. Position the collector panel at an angle recommended by the manufacturer (usually around 30° to 45°).
Step 3: Connecting the System
1. Connect the hot water pipe to the outlet of the collector.
2. Link the cold water pipe to the inlet of the collector.
3. Ensure all connections are tightly sealed to avoid leaks.
Step 4: Testing
1. Turn on the water supply and check for leaks.
2. Allow the system to heat up for several hours under sunlight.
3. Verify that warm water flows from the tap.
Usage Instructions
- Use the timer function if available to optimize heating times based on sunlight availability.
- Regularly clean the surface of the collector to maintain efficiency.
- Insulate pipes to reduce heat loss during colder months.
Maintenance Tips
- Inspect the system monthly for signs of wear or damage.
- Replace seals or gaskets if they show signs of deterioration.
- Clean filters quarterly to ensure smooth water flow.
Troubleshooting
| Problem| Possible Cause | Solution |
|--------------------------|------------------------------------|------------------------------------|
| No hot water | Insufficient sunlight| Move the collector to a sunnier spot |
| Leaks| Loose connections| Tighten all fittings |
中文版说明
安全注意事项
- 确保安装区域稳固，并能承受设备重量。
- 避免在高温时段的直射阳光下安装。
- 安装和操作期间请远离儿童。
- 维修前务必切断电源。
安装步骤
第一步：准备
1. 核对包装内所有组件是否齐全。
2. 在阳台上选择一个阳光充足的位置。
第二步：安装集热器
1. 使用提供的螺丝牢固地将支架固定在墙上。
2. 将集热板以制造商推荐的角度（通常为30°至45°）定位。
第三步：连接系统
1. 将热水管连接到集热器的出水口。
2. 将冷水管连接到集热器的进水口。
3. 确保所有连接处密封良好，防止漏水。
第四步：测试
1. 打开水源检查是否有漏水现象。
2. 让系统在阳光下加热数小时。
3. 确认热水从水龙头流出。
使用说明
- 如果有定时功能，请根据日照情况优化加热时间。
- 定期清洁集热器表面以保持效率。
- 对管道进行保温以减少冬季热量损失。
维护提示
- 每月检查系统是否存在磨损或损坏迹象。
- 如发现密封圈或垫圈老化，请及时更换。
- 每季度清洗过滤器以确保水流畅通。
故障排查
| 问题 | 可能原因 | 解决方案|
|----------------------|----------------------------------|---------------------------------|
| 无热水 | 日照不足 | 移动集热器到更明亮的地方|
| 漏水 | 连接松动 | 紧固所有接口 |
如果您在安装或使用过程中遇到任何问题，请联系我们的客服中心获取进一步帮助。感谢您选择我们的产品！
---
Wall-Mounted Solar Water Heater Installation and User Manual (English-Chinese Edition)
